2.1Installation

2.1.1System requirements

Before installing the WiFi-AP Solo drivers and utilities, make sure that your system meets the following requirements.

•ASUS motherboard with WiFi-AP Solo onboard solution

•Intel® Pentium™ 4

•Minimum 128MB system memory

•Operating system: Windows® XP/ XP-64bit/ Server 2003/ Server 2003 64-bit

•Optical drive for utilities and driver installation

2.1.2Installing the antenna

The WiFi-AP Solo wireless solution comes with an omni-directional and moveable antenna to maximize the WiFi-AP Solo coverage.

To install the antenna:

1.Locate the wireless LAN antenna port on the motherboard rear panel.

2. Connect the antenna twist- on connector (female) to the wireless LAN antenna port (male).

3.Place the antenna at an elevated location to enhance your wireless LAN coverage.

The antenna may differ depending on the model.

Do not place the antenna under your table or in a closed compartment.

2-2