Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc. Main���� Advanced�������� Boot���� Security Save & Exit
Password Description
If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup.
If ONLY the user’s password is set, then this
is a power on password and must be entered to boot or enter Setup. In Setup, the User will have Administrator rights.
Set Administrator Password.
The password length must be in the following range:
Minimum length 3
Maximum length 20
Administrator Password Status | NOT INSTALLED |
|
|
User Password Status | NOT INSTALLED |
|
|
Administrator Password |
|
|
|
User Password |
|
|
|
HDD Password Status : | NOT INSTALLED | →← : Select Screen | |
Set Master Password |
| ↑↓ | : Select Item |
Set User Password |
| Enter : Select | |
I/O Interface Security |
| +/— | : Change Opt. |
| F1 | : General Help | |
|
| F9 | : Optimized Defaults |
|
| F10 | : Save |
|
| ESC | : Exit |
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
To set the password:
1.On the Security screen, select Administrator Password or User Password.
2.Type in a password and press [Enter].
3.
4.Password is then set.
To clear the password:
1.On the Security screen, select Administrator Password or User Password.
2.Enter the current password and press [Enter].
3.Leave the Create New Password field blank and press [Enter].
4.Leave the Confirm New Password field blank and press [Enter].
5.Password is then cleared.
You will be asked to enter the User Password whenever you power on the Notebook PC (enter BIOS or OS).The Administrator Password is only asked when you would like to enter and configure the BIOS settings.
Notebook PC User Manual |