Asus F1A55-M LE R2.0 manual 39

3.ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

ATX12V			EATXPWR
GND	+12V DC	+3 Volts		GND
GND	+12V DC	+12	Volts	+5 Volts
	PIN 1	+12	Volts	+5 Volts
	+5V Standby			+5 Volts
		Power OK		-5 Volts
			GND	GND
		+5 Volts		GND
			GND	GND
F1A55-M LE R2.0		+5 Volts		PSON#
			GND	GND
		+3	Volts	-12 Volts
		+3	Volts	+3 Volts
			PIN 1

F1A55-M LE R2.0 ATX power connectors

•We recommend that you use an ATX 12V Specification 2.0‑-compliant power supply unit (PSU) with a minimum of 300W power rating. This PSU type has 24-pin and 4-pin power plugs.

•If you intend to use a PSU with 20-pin and 4-pin power plugs, ensure that the 20-pin power plug can provide at least 15 A on +12 V and that the PSU has a minimum power rating of 300W. The system may become unstable or may not boot up if the power is inadequate.

•DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will not boot up.

•We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices or when you intend to install additional devices. The system may become unstable or may not boot up if the power is inadequate.

•If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.

ASUS F1A55-M LE R2.0 1-27