6.System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
F_PANEL
PWR LED PWR BTN
PLED+-
PLEDPWRGND
PIN 1
_HD LED_HD LED+-GroundReset
HD_LED RESET
F1A55-M LE R2.0 System panel connector
•System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.
•Hard disk drive activity LED (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable to this connector. The IDE LED lights up or flashes when data is read from or written to the HDD.
•ATX power button/soft-off button (2-pin PWRSW) This 2-pin connector is for the system power button.
•Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power.
7.LPT connector (26-1 pin LPT)
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible computers.
LPT
AFDERR#INIT#SLIN#GNDGNDGNDGNDGNDGNDGNDGND
F1A55-M LE R2.0
STB#PD0PD1PD2PD3PD4PD5PD6PD7ACK#BUSYPESLCT 1PIN
F1A55-M LE R2.0 Parallel Port Connector
1-30 | Chapter 1: Product introduction |