Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high- definition audio depending on the audio standard that the front panel audio module supports.
[HD] | Sets the front panel audio connector (AAFP) mode to high definition audio. |
[AC97] | Sets the front panel audio connector (AAFP) mode to legacy AC’97. |
SPDIF Out Type [SPDIF]
[SPDIF] | Sets to [SPDIF] for SPDIF audio output. |
[HDMI] | Sets to [HDMI] for HDMI audio output. |
Realtek LAN Controller [Enabled]
[Enabled] | Enables the Realtek LAN controller. |
[Disabled] | Disables the controller. |
Realtek PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN Controller item to [Enabled] and allows you to enable or disable the Rom Help of the Realtek LAN controller. Configuration options: [Enabled] [Disabled]
Serial Port Configuration
The
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Configuration options: [Enabled] [Disabled]
Change Settings [IO=3F8h; IRQ=4]
Allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
Parallel Port Configuration [Enabled]
The
Parallel Port [Enabled]
Allows you to enable or disable the parallel port (LPT/LPTE).
Configuration options: [Enabled] [Disabled]
Change Settings [Auto]
Allows you to select the Parallel Port base address.
Configuration options: [IO=378h; IRQ=5] [IO=378h; IRQ=5,6,7,9,10,11,12] [IO=278h; IRQ=5,6,7,9,10,11,12] [IO=3BCh; IRQ=5,6,7,9,10,11,12]
Device Mode [Auto]
Allows you to set the Printer port mode. Configuration options: [STD Printer Mode] [SPP Mode]
ASUS |