2.7.1Bootup NumLock State [On]
[On] | Sets the |
[Off] | Sets the |
2.7.2Full Screen Logo [Enabled]
[Enabled] | Enables the full screen logo display feature. |
[Disabled] | Disables the full screen logo display feature. |
| Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. |
Post Report [5 sec]
This item appears only when the Full Screen Logo item is set to [Disabled] and allows you to set the waiting time for the system to display the post report. Configuration options: [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec] [Until Press ESC]
2.7.3Fast Boot [Enabled]
Enable or disable boot with initialization of a minimal set of devices to launch active boot option. Configuration options: [Disabled] [Enabled]
The following three items appear only when you set Fast Boot to [Enabled].
USB Support [Partial Initial]
[Disabled] | All USB devices will not be available until after OS boot. |
[Full Initial] | All USB devices will be available in OS and during POST. |
[Partial Initial] | Specific USB port/device will not be available before OS boot. |
PS2 Devices Support [Enabled]
[Auto] | Automatic configuration. |
[Enabled] | Allows the BIOS to boot from PS/2 devices. |
Network Stack Driver Support [Disabled]
[Disabled] | The BIOS skips over the Network Stack Driver and tries to boot from |
| the next device. |
[Enabled] | Allows the BIOS to boot from the Network Stack Driver. |
2.7.4Post Logo Delay Time [3 sec]
Allows you to set the waiting time for the system to display the post logo. Configuration options: [0 sec] [1 sec] [2 sec] [3 sec] [4 sec] [5 sec] [6 sec] [7 sec] [8 sec] [9 sec] [10 sec]
2.7.5Wait For ‘F1’ If Error [Enabled]
[Disabled] | Disables this function. |
[Enabled] | The system waits for the <F1> key to be pressed when error occurs. |
ASUS |