7.USB connectors
These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 Mbps connection speed.
| USB910 | |
| USB+5V USB P10- USB P10+ | GND NC |
|
| |
PIN 1 | USB+5V USB P9- USB P9+ | GND |
| ||
USB78
|
| USB+5V USB_P8- USB_P8+ | GND NC | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PIN 1 | USB+5V USB P7- USB P7+ | GND | |||||
|
| ||||||
USB56
|
| USB+5V USB_P6- USB_P6+ | GND NC | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PIN 1 | USB+5V USB P5- USB P5+ | GND | |||||
|
| ||||||
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB module cable is purchased separately.
Chapter 1: Product introduction |