![](/images/backgrounds/166559/166559-8468x1.png)
[Power Off] | The system goes into off state after an AC power loss. |
[Last State] | The system goes into either off or on state, whatever the system state was |
| before the AC power loss. |
Power On By PS/2 Keyboard [Disabled]
[Disabled] | Disables the Power On by a PS/2 keyboard. |
[Space Bar] | Sets the Space Bar on the PS/2 keyboard to turn on the system. |
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system. | |
[Power Key] | Sets Power key on the PS/2 keyboard to turn on the system. This feature |
| requires an ATX power supply that provides at least 1A on the +5VSB lead. |
Power On By PS/2 Mouse [Disabled]
[Disabled] | Disables the Power On by a PS/2 mouse. |
[Enabled] | Enables the Power On by a PS/2 mouse. This feature requires an ATX |
| power supply that provides at least 1A on the +5VSB lead. |
Power On By PME [Disabled]
[Disabled] | Disables the PME to wake up by PCI/PCIE devices. |
[Enabled] | Allows you to turn on the system through a PCI/PCIE LAN or modem card. |
| This feature requires an ATX power supply that provides at least 1A on the |
| +5VSB lead. |
Power On By Ring [Disabled]
[Disabled] | Disables Ring to generate a wake event. |
[Enabled] | Enables Ring to generate a wake event. |
Power On By RTC [Disabled]
[Disabled] | Disables RTC to generate a wake event. |
[Enabled] | When set to [Enabled], the items RTC Alarm Date (Days) and Hour/ |
| Minute/Second will become |
2.5.7Network Stack
Network Stack [Disable Link]
This item allows user to disable or enable the UEFI network stack. Configuration options: [Disable Link] [Enabled]
The following two items appear only when you set the previous item to [Enabled].
Ipv4 PXE Support [Enabled]
This item allows user to disable or enable the Ipv4 PXE Boot support. Configuration options: [Disable Link] [Enable]
Ipv6 PXE Support [Enabled]
This item allows user to disable or enable the Ipv6 PXE Boot support. Configuration options: [Disable Link] [Enable]
Chapter 2: Getting started |