Asus F2A85-M, F2A85MCSM manual 39

3.ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

ATX12V EATXPWR

F2A85-M

+12V DC +12V DC

PIN 1

GND

GND

+3 Volts		GND
+12	Volts	+5 Volts
+12	Volts	+5 Volts
+5V Standby		+5 Volts
Power OK		-5 Volts
	GND	GND
+5 Volts		GND
	GND	GND
+5 Volts		PSON#
	GND	GND
+3	Volts	-12 Volts
+3	Volts	+3 Volts
	PIN 1

F2A85-M ATX power connectors

•For a fully configured system, we recommend that you use a power supply unit

(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 300 W.

•DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will not boot up.

•We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.

4.TPM connector (20-1 pin TPM)

This connector supports a Trusted Platform Module (TPM) system, which securely store keys, digital certificates, passwords and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity.

TPM

	GND
F2A85-M	PIN 1
	PCICLK

F2A85-M TPM Connector

FRAME PCIRST# PWROWN LAD3 LAD2 +3V LAD1 LAD0 GND SMBSCL SMBSDA +3VSB SERIRQ GND GPIO SB_SUS_STAT RESET

TPM module is purchased separately.

ASUS F2A85-M 1-27