7.USB 2.0 connectors (10-1 pin USB56, USB78, USB910)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to

480 Mbps connection speed.

 

USB910

 

USB+5V USB P10- USB P10+

GND NC

F2A85-M

 

 

PIN 1

USB+5V USB P9- USB P9+

GND

 

F2A85-M USB2.0 connectors

USB78

 

 

USB+5V USB_P8- USB_P8+

GND NC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PIN 1

USB+5V USB P7- USB P7+

GND

 

 

USB56

 

 

USB+5V USB_P6- USB_P6+

GND NC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PIN 1

USB+5V USB P5- USB P5+

GND

 

 

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB module cable is purchased separately.

8.USB 3.0 connector (20-1 pin USB3_34)

This connector is for the additional USB 3.0 ports. Connect the USB 3.0 bracket cable to this connector, then install the USB 3.0 bracket to the rear side of the chassis. If your chassis support customized front panel installation, with ASUS USB 3.0 header, you can have a front panel USB 3.0 solution.

USB3_34

F2A85-M

F2A85-M USB3.0 Front panel connector

The USB 3.0 module is purchased separately.

ASUS F2A85-M

1-29