UMA Frame Buffer Size [Auto]
This item appears only when you set the previous item to [Force]. Configuration options: [Auto] [32M] [64M] [128M] [256M] [512M] [1G] [2G]
2.5.5Onboard Devices Configuration
HD Audio Device [Enabled]
[Enabled] | Enables the High Definition Audio Controller. |
[Disabled] | Disables the controller. |
| The following item appears only when you set the HD Audio Device item to [Enabled]. |
Front Panel Type [HD]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC’97 or high- definition audio depending on the audio standard that the front panel audio module supports.
[HD] | Sets the front panel audio connector (AAFP) mode to high definition audio. |
[AC97] | Sets the front panel audio connector (AAFP) mode to legacy AC’97. |
Atheros Lan [Enabled]
[Enabled] | Enables the Atheros LAN controller. |
[Disabled] | Disables the controller. |
Atheros Rom [Disabled]
This item appears only when you set the Atheros Lan item to [Enabled] and allows you to enable or disable the Rom of the Atheros LAN controller. Configuration options: [Enabled] [Disabled]
Serial Port Configuration
The
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Configuration options: [Enabled] [Disabled]
Change Settings [Auto]
Allows you to select the Serial Port base address. Configuration options: [Auto] [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.5.6APM
Restore AC Power Loss [Power Off]
[Power On] | The system goes into on state after an AC power loss. |
[Power Off] | The system goes into off state after an AC power loss. |
[Last State] | The system goes into either off or on state, whatever the system state was |
| before the AC power loss. |
ASUS |