2.6.1CPU Temperature / MB Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures. Select Ignore if you do not wish to display the detected temperatures.
2.6.2CPU_FAN / CHA_FAN1/2 Speed [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the CPU / chassis fan speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field shows N/A. Select Ignore if you do not wish to display the detected speed.
2.6.3CPU_FAN Q-Fan Control [Enabled]
[Disabled] | Disables the CPU |
[Enabled] | Enables the CPU |
CPU_FAN Speed Low Limit [200 RPM]
This item appears only when you enable the CPU_FAN
CPU_FAN Profile [Standard]
This item appears only when you enable the CPU_FAN
[Standard] | Sets to [Standard] to make the CPU fan automatically adjust depending on |
| the CPU temperature. |
[Silent] | Sets to [Silent] to minimize the fan speed for quiet CPU fan operation. |
[Turbo] | Sets to [Turbo] to achieve maximum CPU fan speed. |
[Manual] | Sets to [Manual] to assign detailed fan speed control parameters. |
The following four items appear only when you set CPU_FAN Profile to [Manual].
CPU_FAN Upper Temperature [70]
Use the <+> and
CPU_FAN Fan Max. Duty Cycle(%) [100]
Use the <+> and
CPU_FAN Lower Temperature [20]
Displays the lower limit of the CPU temperature.
CPU_FAN Fan Min. Duty Cycle(%) [40]
Use the <+> and
Chapter 2: BIOS information |