2.ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

ATX12V EATXPWR

+12V DC +12V DC

PIN 1

GND

GND

H61M-K

+3 Volts

 

 

 

 

 

 

GND

 

 

 

 

 

 

+12

Volts

 

 

 

 

 

 

+5 Volts

+12

Volts

 

 

 

 

 

 

+5 Volts

+5V Standby

 

 

 

 

 

 

+5 Volts

Power OK

 

 

 

 

 

 

-5 Volts

 

GND

 

 

 

 

 

 

GND

+5 Volts

 

 

 

 

 

 

GND

 

GND

 

 

 

 

 

 

GND

+5 Volts

 

 

 

 

 

 

PSON#

 

GND

 

 

 

 

 

 

GND

+3

Volts

 

 

 

 

 

 

-12 Volts

+3

Volts

 

 

 

 

 

 

+3 Volts

 

PIN 1

 

 

 

 

 

 

H61M-K ATX power connectors

•For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W.

•DO NOT forget to connect the 4-pin ATX +12V power plug. Otherwise, the system will not boot up.

•We recommend that you use a PSU with higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.

1-26

Chapter 1: Product introduction