![](/images/backgrounds/166531/166531-13230x1.png)
1.2.9Internal connectors
1.Intel® H87 Serial ATA 6.0 Gb/s connectors
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables.
If you installed Serial ATA hard disk drives, you can create a RAID 0, 1, 5, and 10 configuration with the Intel® Rapid Storage Technology through the onboard Intel® H87 chipset.
SATA6G_1 SATA6G_2
H87M-PLUS
_RSATA_RSATA_RSATA_RSATA GNDTXP1TXN1GNDRXN1RXP1GND
SATA6G_3
_RSATA_RSATA_RSATA_RSATA GNDTXP3TXN3GNDRXN3RXP3GND
SATA6G_5 GND _RSATARXP5 _RSATARXN5 GND RSATA_TXN5 RSATA_TXP5 GND
_RSATA_RSATA_RSATA_RSATA GNDTXP2TXN2GNDRXN2RXP2GND
SATA6G_4
_RSATA_RSATA_RSATA_RSATA GNDTXP4TXN4GNDRXN4RXP4GND
SATA6G_6 GND _RSATARXP6 _RSATARXN6 GND _RSATATXN6 RSATA_TXP6 GND
1 Chapter
•These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 3.6.3 SATA Configuration for details.
•Before creating a RAID set, refer to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD.
•When using
2.LPT connector
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT standardizes as IEEE 1284, which is the parallel port interface on IBM
|
| LPT |
| GND | SLCT |
| PE | |
| GND | BUSY |
| GND | ACK# |
| GND | PD7 |
| GND | PD6 |
| GND | PD5 |
| GND | PD4 |
| GND | PD3 |
SLIN# | PD2 | |
| INIT# | PD1 |
| ERR# | PD0 |
| AFD | STB# |
PIN 1
Chapter 1: Product introduction |