Asus H87M-PLUS manual 34

1 Chapter

9.ATX power connectors (24-pin EATXPWR; 8-pin EATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

	EATX12V		EATXPWR
	DC DC DC DC	+3 Volts		GND
	+12V +12V +12V +12V
		+12	Volts	+5 Volts
		+12	Volts	+5 Volts
	+5V Standby			+5 Volts
		Power OK		-5 Volts
	PIN 1		GND	GND
	GND GND GND GND	+5 Volts		GND
H87M-PLUS			GND	GND
		+5 Volts		PSON#
			GND	GND
		+3	Volts	-12 Volts
		+3	Volts	+3 Volts
			PIN 1

H87M-PLUS ATX power connectors

• For a fully configured system, we recommend that you use a power supply unit (PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a minimum power of 350W.

• DO NOT forget to connect the 4-pin/8-pin EATX12V power plug. Otherwise, the system will not boot.

• We recommend that you use a PSU with a higher power output when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

• If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power or above to ensure the system stability.

• If you are uncertain about the minimum power supply requirement for your system, refer to the Recommended Power Supply Wattage Calculator at http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details.

10. TPM connector (20-1 pin TPM)

This connector supports a Trusted Platform Module (TPM) system, which securely store keys, digital certificates, passwords and data. A TPM system also helps enhance network security, protect digital identities, and ensures platform integrity.

		TPM
	RESET	SB_SUS_STAT
	GPIO	GND
	SERIRQ	+3VSB
	SMBSDA	SMBSCL
	GND	LAD0
	LAD1	+3V
H87M-PLUS	LAD2	LAD3
	PWROWN	PCIRST#
		FRAME
	GND	PCICLK
		PIN 1

H87M-PLUS TPM Connector

The TPM module is purchased separately.

1-20 Chapter 1: Product introduction