Creating RAID

To create RAID:

1.

Press <F11> on your keyboard or click

from the BIOS screen to open

 

EZ Tuning Wizard screen.

 

2.Click RAID then click Next.

•Ensure that your HDDs have no existing RAID volumes.

•Ensure to connect your HDDs to Intel® SATA connectors.

3.Select the type of storage for your RAID Easy Backup or Super Speed, then click

Next.

a.For Easy Backup, click Next then select from Easy Backup (RAID1) or Easy Backup (RAID10).

You can only select Easy Backup (RAID 10) if you connect four (4) HDDs.

b.For Easy Backup, click Next then select from Super Speed (RAID0) or Super Speed (RAID5).

4.After selecting the type of RAID, click Next then click Yes to continue the RAID setup.

5.After the RAID setup is done, click Yes to exit the setup then click OK to reset your system.

2-14

Chapter 2: Getting started