Charging USB devices in Power State S5 [Disabled]
[Enabled] | Charges USB devices even when the system is in Power State S5. State |
| S5 is the |
| memory state and is not doing any computing tasks. |
[Disabled] | Disables this function. |
Serial Port Configuration
The
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM).Configuration options: [Enabled] [Disabled]
Change Settings [IO=3F8h; IRQ=4]
This item appears only when you set the Serial Port to [Enabled] and allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3]
2.6.8APM
Deep S4 [Disabled]
When enabled, the system in S4 state will further reduce power usage and will power off the USB and PS/2 devices. The system in deep S4 state can be woken up via the power button, devices in LAN, or other ways except via the USB and PS/2 devices. Configuration options: [Disabled] [Enabled]
Restore AC Power Loss [Power Off]
[Power On] | The system goes into on state after an AC power loss. |
[Power Off] | The system goes into off state after an AC power loss. |
[Last State] | The system goes into either off or on state, whatever the system state was |
| before the AC power loss. |
Power On By PS/2 Keyboard [Disabled]
[Disabled] | Disables the Power On by a PS/2 keyboard. |
[Space Bar] | Sets the Space Bar on the PS/2 keyboard to turn on the system. |
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system. | |
[Power Key] | Sets Power key on the PS/2 keyboard to turn on the system. This feature |
| requires an ATX power supply that provides at least 1A on the +5VSB lead. |
Power On By PCI-E/PCI [Disabled]
This item allows you to enable or disable the
Power On By Ring [Disabled]
[Disabled] | Disables Ring to generate a wake event. |
[Enabled] | Enables Ring to generate a wake event. |
ASUS |