Asus K7V-T JEN, VSB, Volt, [1-2], [1-2], Setting, Setting, 3VSBSLT, [2-3](default), Disable (Jumper), 4.4 Advanced Menu, 1)JumperFree™ Mode (JEN)

Settings Motherboard

SETUP H/W .3

3.HARDWARE SETUP

1)JumperFree™ Mode (JEN)

This jumper allows you to enable or disable the JumperFree™ mode. The JumperFree™ mode allows processor settings to be made through the BIOS setup (see 4.4 Advanced Menu).

IMPORTANT: In JumperFree™ mode, all DIP switches (DSW) must be set to OFF and VID1, VID2, and VID3 (see 6) Voltage Regulator Output Setting) must be set to [3-4].

Setting	JEN
Enable (JumperFree)	[2-3] (default)
Disable (Jumper)	[1-2]
			DSW ON
			OFF
			1	2	3	4
			VID3		3	4
			VID2
			VID1
K7V-T
	Jumper Mode		Jumper Free
			(Default)
	1	2	JEN	2	3
K7V-T Jumper Mode Setting

2)PCI 3Volt Setting (3VSBSLT)

This jumper allows you to select the voltage supplied to PCI devices. If you have PCI devices that require auxiliary power, set this jumper to 3 VSB.

Setting		3VSBSLT
3	Volt	[1-2]
3	VSB	[2-3] (default)

3VSBSLT

1	2	2	3
Add 3 Volt		Add 3 VSB
		(Default)

K7V-T

K7V-T PCI 3Volt Selection

18 ASUS K7V-T User’s Manual