Asus K7V-T CPU, (MHz), TACT INFORMATION), ASUS K7V-TUser’s Manual, External Frequency Table, 6)Voltage Regulator Output Setting (VID1, VID2, VID3)

3. HARDWARE SETUP

External Frequency Table

CPU	PCI		Frequency Selection Switches
(MHz)	(MHz)	1	2	3	4
100.00	33.33	[ O N ]	[ O N ]	[OFF]	[OFF]
103.00	34.33	[ O N ]	[ O N ]	[ O N ]	[ O N ]
105.00	35	[OFF]	[OFF]	[OFF]	[OFF]
110.00	36.67	[OFF]	[OFF]	[OFF]	[ O N ]

NOTE: For updated processor settings, visit the ASUS web site (see ASUS CON-

TACT INFORMATION).

WARNING! Premature wearing of the processor may result when overclocking. Be sure that the DIMM you use can handle the specified SDRAM MHz or else bootup will not be possible.

6)Voltage Regulator Output Setting (VID1, VID2, VID3)

This jumpers allow you to manually adjust the CPU core voltage. It is recom- mended to use CPU Default as the CPU core voltage. CPU Default means the Vcore is generated according to the CPU VID configuration. For each jumper setting, there are two voltage options, depending on the CPU used.

.3 SETUPH/W

SettingsMotherboard

K7V-T

K7V-T CPU Core Voltage Selection

1 2 3 4	1 2 3 4	1 2 3 4
VID3
VID2
VID1
2/2.05Volts	1.9/1.95Volts	1.8/1.85Volts
1 2 3 4	1 2 3 4	1 2 3 4
VID3
VID2
VID1
1.7/1.75Volts	1.6/1.65Volts	1.5/1.55Volts
1 2 3 4	1 2 3 4	1 2 3 4
VID3
VID2
VID1
1.4/1.45Volts	1.3/1.35olts	CPU Default/
		JumperFree
		(Default)

ASUS K7V-T User’s Manual 21