2.4.4 Chipset
The items in this menu show the
Memory CLK | : 200 MHz |
|
CAS Latency | : 2.5 |
|
DRAM RAS TO CAS Delay : 3 CLK |
| |
DRAM ACTIVE TIME : 8 CLK |
| |
DRAM RAS PRECHANGE TIME : 3 CLK |
| |
MemClock Mode |
| [Auto] |
MCT Timing Mode |
| [Auto] |
1T/2T Timing |
| [Auto] |
Master ECC Enabled | [Enabled] | |
Audio CODEC Interface | [Auto] | |
Primary Video |
| [PCI] |
Aperture Size |
| [ 128 MB] |
AGP FW Enable |
| [Auto] |
AGP SideBand Address | [Auto] | |
Onboard Device |
|
|
USB Configuration |
| |
MEMCLK can be set by the code using AUTO, or if you use LIMIT, you can set one of the standard values.
Memclock Mode [ Auto]
Allows you to set the memory clock mode. Set by the code using [Auto] or select [Manual] to set using one of the standard values.
Configuration options: [Auto] [Manual]
MemClock Value [200 MHz]
Sets the Memory clock value. This item appears only when the MemClock Mode item is set to Manual. Configuration options: [200 MHz] [266 MHz] [333 MHz] [400 MHz]
MCT Timing Mode [Auto]
Sets the MCT timing mode. Configuration options: [Auto] [Manual]
CAS Latency (CL) [Auto]
Sets the CAS Latency value. Configuration options: [Auto] [2.0] [2.5] [3.0]
DRAM RAS TO CAS Delay [4 CLK]
Sets the DRAM RAS TO CAS Delay.
Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
DRAM RAS PRECHANGE Time [4 CLK]
Sets the DRAM RAS PRECHANGE Time.
Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
ASUS |