Asus K8V-XE Current DRAM Frequency, Timing Mode [Auto], Memclock index value (Mhz), CAS# latency (Tcl), Min RAS# active time (Tras), RAS# to CAS# delay (Trcd)

Phoenix-Award BIOS CMOS Setup Utility

Advanced

	DRAM Configuration					Select Menu
	Current DRAM Frequency		200		MHz	Item Specific Help
	Timing Mode		[	Auto]
x	Memclock index value (Mhz)			200Mhz		<Enter> to select DARM
x	CAS# latency (Tcl)		2.5			configuration by
x Min RAS# active time(Tras)				8T		[Auto] is recommended.
x	RAS# to CAS# delay	(Trcd)		4T		[Manual] allows you to
x	Row precharge Time	(Trp)		4T		set each
x	1T/2T Memory Timing			1T		configuration on your
	MTRR mapping mode		[Continous]			own.

F1:Help	↑↓ : Select Item	-/+: Change Value	F5: Setup	Defaults
ESC: Exit	→←: Select Menu	Enter: Select Sub-menu	F10: Save	and Exit

Current DRAM Frequency

Shows the Transfer mode. This item is not configurable.

Timing Mode [Auto]

Sets the timing mode. Configuration options: [Auto] [Manual]

Memclock index value (Mhz)

Shows the memory clock index value. This item is not configurable.

CAS# latency (Tcl)

Shows the latency between the SDRAM read command and the time the data actually becomes available.This item is not configurable.

Min RAS# active time (Tras)

Shows the minimum RAS# active time. This item is not configurable.

RAS# to CAS# delay (Trcd)

Shows the latency between the DDR SDRAM active command and the read/ write command. This item is not configurable.

Row precharge Time (Trp)

Shows the Row precharge time.This item is not configurable.

1T/2T Memory Timing

Shows the memory timing. This item is not configurable.

MTRR mapping mode [Continous]

Sets the MTRR mapping mode.

Configuration options: [Continous] [Discrete]

2-22 Chapter 2: BIOS Setup