1.7.3Installing a DIMM

Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to both the motherboard and the components.

1.

Unlock a DIMM socket by pressing

 

2

3

DDR2 DIMM notch

 

the retaining clips outward.

2.

Align a DIMM on the socket such

 

1

 

that the notch on the DIMM matches

 

 

the break on the socket.

 

 

3.

Firmly insert the DIMM into the

1

 

 

socket until the retaining clips snap

 

 

back in place and the DIMM is

 

 

 

properly seated.

 

 

Unlocked retaining clip

•A DDR2 DIMM is keyed with a notch so that it fits in only one direction. DO NOT force a DIMM into a socket to avoid damaging the DIMM.

•The DDR2 DIMM sockets do not support DDR DIMMs. Do not install DDR DIMMs to the DDR2 DIMM sockets.

1.7.4

Removing a DIMM

2

To remove a DIMM:

 

 

1. Simultaneously press the retaining

 

 

clips outward to unlock the DIMM.

1

notch

 

 

 

 

DDR2 DIMM

1

1

Support the DIMM lightly with your fingers when pressing the retaining clips. The DIMM might get damaged when it flips out with extra force.

2.Remove the DIMM from the socket.

ASUS M2A-VM

1-17