7.USB connectors (10-1 pin USB56, USB78, USB910)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

M2A-VM

USB56

USB78

USB910

_ _P6+

_ _P8+

_ _P10+

-P6

-P8

-P10

USB+5V USB USB GND NC

USB+5V USB USB GND NC

USB+5V USB USB GND NC

M2A-VM.USB.2.0.connectors

PIN1

PIN1

PIN1

_ GND

_ GND

_ GND

USB+5V _

USB+5V _

USB+5V _

P5+-P5

P7+-P7

P9+-P9

USB

USB

USB

USB

USB

USB

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

The USB 2.0 module is purchased separately.

8.Optical drive audio in connector (4-pin CD)

These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV tuner, or MPEG card.

CD

(black)

M2A-VM

Channel

 

Left Audio

M2A-VM Internal audio connector

Ground

Ground

Channel

 

Right Audio

To activate ASUS Music Alarm:

• Connect the analog audio cable from the optical drive to the 4-pin CD-IN connector labeled CD on the motherboard.

•Connect speakers or a headphone to the Line-Out (lime-colored) port on the front or rear panel for audio output. You may also connect speakers or a headphone to the output jack on the optical drive.

ASUS M2A-VM

1-29