6.ATX power connectors (24-pin EATXPWR1,4-pin ATX12V)

These connectors are for an ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

•Do not forget to connect the 4-pin ATX +12 V power plug;

otherwise, the system will not boot.

•Use of a PSU with a higher power output is recommended when configuring a system with more power-consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•Make sure that your power supply unit (PSU) can provide at least the minimum power required by your system. See the table below for details.

ATX12V

EATXPWR

M2N-E SLI

M2N-E SLI CPU ATX Power Connector7.Internal audio connectors (4-pin CD)

GND +12V DC

+3 Volts

-12 Volts

Ground

PSON#

Ground

Ground

Ground

-5 Volts

+5 Volts

+5 Volts

+5 Volts

Ground

GND +12V DC

+3 Volts

+3 Volts

Ground

+5 Volts

Ground

+5 Volts

Ground

Power OK

+5V Standby

+12 Volts

+12 Volts

+3 Volts

These connectors allow you to receive stereo audio input from sound sources such as a CD-ROM, TV-tuner, or MPEG card.

M2N-E SLI

CD

 

 

 

 

 

Right Audio Channel

(black)

 

 

 

 

 

Ground

 

 

 

 

 

Ground

 

 

 

 

 

 

Left Audio Channel

M2N-E SLI CPU Internal Audio Connector

2-28

Chapter 2: Hardware information