Asus M2N-E SLI Boot Up Floppy Seek [Disabled], Bootup Num-Lock [On], Typematic Rate Setting [Disabled], Typematic Rate (Chars/Sec) [6], Typematic Delay (Msec) [250]

Boot Up Fl oppy Seek [ Di sabl ed]

Enable this item to check for a boot floppy disk during POST. Configuration options: [Disabled] [Enabled]

Bootup Num-Lock [ On]

Allows you to select the power-on state for the NumLock. Configuration options: [Off] [On]

Typemati c Rate Setti ng [ Di sabl ed]

Allows you to set the keystroke rate. Enable this item to configure the Typematic Rate (Chars/Sec) and the Typematic Delay (Msec). Configuration options: [Disabled] [Enabled]

The items Typematic Rate (Chars/Sec) and Typematic Delay (Msec) becomes user-configurable only when the item Typematic Rate Setting is enabled.

Typemati c Rate (Chars/Sec) [ 6]

Allows you to select the rate at which a character repeats when you hold a key. Configuration options: [6] [8] [10] [12] [15] [20] [24] [30]

Typemati c Del ay (Msec) [ 250]

Allows you to set the delay before keystrokes begin to repeat. Configuration options: [250] [500] [750] [1000]

OS Sel ect for DRAM > 64MB [ Non-OS2]

Set this item to OS2 only when you are running on an OS/2 operating system with an installed RAM of greater than 64 KB.

Configuration options: [Non-OS2] [OS2]

Full Screen LOGO [Enabl ed]

Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled]

• Make sure that the above item is set to [Enabled] if you want to use the ASUS MyLogo2™ feature.

•See section “5.4.1 ASUS MyLogo2™” for details.

H al t On [ All, But Keyboard]

Allows you to error report type.

Configuration options: [All Errors] [No Errors] [All, But Keyboard] [All, But Diskette] [All, But Disk/Key]

ASUS M2N-ESLI 4-41