USB Mass Storage Device Configuration

USB Mass Storage Device Configuration

USB Mass Storage Reset Delay

[20 Sec]

Device #1

Netac

Emulation Type

[Auto]

Number of seconds POST waits for the USB mass storage device after start unit command.

USB Mass Storage Reset Delay [20 Sec]

Allows you to set the numbers of seconds POST waits for the USB mass storage device after start unit command. Configuration options: [10 Sec] [20 Sec] [30 Sec] [40 Sec]

Emulation Type [Auto]

Allows selection of the emulation type. If Auto, USB devices less than 530MB will be emulated as Floppy and remaining as hard drive. Forced FDD option can be used to force a HDD formated drive to boot as FDD. Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CDROM]

2-28

Chapter 2: BIOS setup