DDR2-1066MHz capability

Vendor

Part No.

Size

SS/

CL

Chip No.

Chip

DIMM support

DS

Brand

A*

B*

 

 

 

 

 

Corsair

CM2X1024-8500C5

1G

DS

N/A

Heat-Sink Package

N/A

•

•

GEIL

GB24GB8500C5QC

1G

SS

5

GL2L128M88BA25AB

GEIL

•

•

• DDR2 1066 is supported by AM2+ CPU only.

• The default DIMM frequency depends on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value.

SS: Single-sided / DS: Double-sided

DIMM support:

•A*: Supports one module inserted into either slot as the single-channel memory configuration.

•B*: Supports one pair of modules inserted into both the yellow slots as one pair of dual-channel memory configuration.

Visit the ASUS website at www.asus.com for the latest QVL.

1.5Expansion slots

In the future, you may need to install expansion cards. The following sub-sections describe the slots and the expansion cards that they support.

Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.

1.5.1Installing an expansion card

To install an expansion card:

1.Before installing the expansion card, read the documentation that comes with it and make the necessary hardware settings for the card.

2.Remove the chassis cover (if your motherboard is already installed in a chassis).

3.Remove the bracket opposite the slot that you intend to use.

4.Align the card connector with the slot and press firmly until the card is completely seated on the slot.

5.Secure the card to the chassis with the screw.

6.Replace the chassis cover.

ASUS M2N68-AM SE2

1-6