2.6.1 Boot Devi ce Pri ori ty

Boot Device Priority

1st Boot Device 2nd Boot Device 3rd Boot Device

[1st FLOPPY DRIVE] [Hard Drive] [ATAPI CD-ROM]

1st ~ xxth Boot Devi ce [ 1st Fl oppy Dri ve]

These items specify the boot device priority sequence from the available devices. The number of device items that appear on the screen depends on the the number of devices installed in the system. Configuration options: [1st FLOPPY DRIVE][Hard Drive][ATAPI CD-ROM][Disabled]

2.6.2 Boot Setti ngs Confi gurati on

Boot Settings Configuration

 

Quick Boot

[Enabled]

Full Screen Logo

[Enabled]

Bootup Num-Lock

[On]

Wait for ‘F1’ If Error

[Enabled]

Hit ‘DEL’ Message Display

[Enabled]

Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.

Qui ck Boot [Enabl ed]

Enabling this item allows the BIOS to skip some Power On Self Tests (POST) while booting to decrease the time needed to boot the system. When set to [Disabled], BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]

Full Screen Logo [Enabl ed]

Allows you to enable or disable the full screen logo display feature. Configuration options: [Disabled] [Enabled]

Make sure that the above item is set to [Enabled] if you wish to use the ASUS MyLogo™ feature.

2-32

Chapter 2: BIOS Setup