The following item appears only when you set the AI Overclocking item to [Manual].

CPU Frequency [XXX]

Displays the frequency sent by the clock generator to the system bus and PCI bus. The value of this item is auto-detected by the BIOS. Use the <+> and <-> keys to adjust the CPU frequency. You can also type the desired CPU frequency using the numeric keypad. The values range from 200 to 240.

2.4.2 USB Confi gurati on

The items in this menu allows you to change the USB-related features. Select an item then press <Enter> to display the configuration options.

USB Configuration

Module Version - 2.24.0-11.4

USB Devices Enabled: None

USB 1.1

Ports Configuration

[Enable]

USB 2.0

Ports Enable

[Enable]

Legacy USB Support

[Enabled]

Port 64/60 Emulation

[Disabled]

USB 2.0

Controller Mode

[HiSpeed]

BIOS EHCI Hand-Off

[Enabled]

The Module Version and USB Devices Enabled items show the auto-detected values. If no USB device is detected, the item shows None.

USB 1.1 Ports Confi gurati on [E nabl e]

Allows you to configure the USB ports.

Configuration options: [Disabled] [Enable]

USB 2.0 Ports E nabl e [E nabl e]

Allows you to enable or disable the USB 2.0 ports.

Configuration options: [Disabled] [Enable]

L egacy USB Support [E nabl ed]

Allows you to enable or disable support for USB devices on legacy operating systems (OS). Setting to Auto allows the system to detect the presence of USB devices at startup. If detected, the USB controller legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]

ASUS M2V-MX

2-21