Hi t ‘DEL’ Message Di spl ay [E nabl ed]

When set to Enabled, the system displays the message “Press DEL to run Setup” during POST. Configuration options: [Disabled] [Enabled]

I nterrupt 19 Capture [ Di sabl ed]

When set to [Enabled], this function allows the option ROMs to trap Interrupt 19. Configuration options: [Disabled] [Enabled]

2.6.3 Securi ty

The Security menu items allow you to change the system security settings. Select an item then press <Enter> to display the configuration options.

Security Settings

 

<Enter> to change

 

 

password.

Supervisor Password

: Not Installed

<Enter>

again to

User Password

: Not Installed

disable

password.

Change Supervisor Password

Change User Password

Change Supervi sor Password

Select this item to set or change the supervisor password. The Supervisor Password item on top of the screen shows the default Not Installed. After you have set a password, this item shows Installed.

To set a Supervisor Password:

1.Select the Change Supervisor Password item and press <Enter>.

2.From the password box, type a password combination of at least six (6) letters and/or numbers, then press <Enter>.

3.Confirm the password when prompted.

The message “Password Installed” appears after you have successfully set your password.

The Supervisor Password item now shows Installed.

To change the supervisor password, follow the same steps as in setting a user password.

2-36

Chapter 2: BIOS Setup