2.5.3 APM Confi gurati on

APM Configuration

 

Power Button Mode

[On/Off]

Restore on AC Power Loss

[Power Off]

Power On Ring

[Disabled]

Power On PME#

[Disabled]

Power On By KBC

[Disabled]

Power On By PS/2 Mouse

[Disabled]

Power On By RTC Alarm

[Disabled]

Power Button Mode [ On/Off]

Allows the system to go into On/Off mode or suspend mode when the power button is pressed. Configuration options: [On/Off] [Suspend]

Restore on AC Power L oss [ Power Off ]

When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state whatever the system state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State]

Power On Ri ng [ Di sabl ed]

Allows either settings of [Enabled] or [Disabled] for powering up the computer when the external modem receives a call while the computer is in Soft-off mode. Configuration options: [Disabled] [Enabled]

The computer cannot receive or transmit data until the computer and applications are fully running. Thus, connection cannot be made on the first try. Turning an external modem off and then back on while the computer is off causes an initialization string that turns the system power on.

Power On PME # [ Di sabl ed]

Allows you to enable or disable the PME#-wake up feature. Configuration options: [Disabled] [Enabled]

2-26

Chapter 2: BIOS Setup