2.5Power menu
The Power menu items allow you to change the settings for the Advanced Configuration and Power Interface (ACPI) and the Advanced Power Management (APM). Select an item then press <Enter> to display the configuration options.
|
|
| BIOS SETUP UTILITY | |||
Main | Advanced | Power | Boot | Tools | Exit | |
Power Settings |
|
|
|
| Select the ACPI state | |
|
|
|
|
|
| used for System |
|
|
|
|
|
| Suspend. |
Suspend Mode |
| [Auto] |
|
| ||
|
|
|
| |||
ACPI 2.0 Support |
| [Disabled] |
|
| ||
ACPI APIC support |
| [Enabled] |
|
| ||
APM Configuration
HW Monitor Configuration
| Select Screen |
| Select Item |
+- | Change Option |
F1 | General Help |
F10 | Save and Exit |
ESC | Exit |
v02.61 (C)Copyright
2.5.1Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
2.5.2ACPI 2.0 Support [Disabled]
Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) 2.0 support. Configuration options: [Disabled] [Enabled]
2.5.3ACPI APIC Support [Enabled]
Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When set to Enabled, the ACPI APIC table pointer is included in the RSDT pointer list. Configuration options: [Disabled] [Enabled]
2.5.4APM Configuration
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. Configuration options: [Power Off] [Power On] [Last State]
Power on From S5 By PME# [Disabled]
Enables or disables PME wake from sleep states. Configuration options: [Disabled] [Enabled]
Power on From S5 By Ring [Disabled]
Enables or disables ring to generate a wake event. Configuration options: [Disabled] [Enabled]
ASUS |