7.USB connectors (10-1 pin USB56, USB78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480Mbps connection speed.
USB56 | USB78 | USB910 | |||
USB+5V USB P6- USB P6+ | GND NC | USB+5V USB P8- USB P8+ | GND NC | USB+5V USB P10- USB P10+ | GND NC |
|
|
|
|
| |
PIN 1 | GND | PIN 1 | GND | PIN 1 | GND |
USB+5V USB P5- USB P5+ | USB+5V USB P7- USB P7+ | USB+5V USB P9- USB P9+ | |||
M4N68T-M USB2.0 connectors
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
The USB 2.0 module is purchased separately.
Chapter 1: Product introduction |