3.5.8APM
UEFI BIOS Utility - Advanced Mode
Main | Ai Tweaker | Advanced | Monitor |
Back | Advanced\ APM > |
|
|
|
|
| Disabled |
ERP Ready |
|
| |
Restore AC Power Loss |
| Power Off | |
Power On By PS/2 Device |
| Disabled | |
Power On By PME Device |
| Disabled | |
Power On By Ring |
| Disabled | |
Power On By RTC |
| Disabled | |
Exit
BootTool
Allow BIOS to switch off some power at S5 to get the system ready for ErP requirement. When set to Enabled, all other PME options will be switched off.
→←: Select Screen
↑↓: Select Item
Enter: Select
F1: General Help
F2: Previous Values
F3: Shortcut
F5: Optimized Defaults
F10: Save ESC: Exit
F12: Print Screen
3 Chapter
| Version 2.00.1208. Copyright (C) 2012 American Megatrends, Inc. |
ErP Ready [Disabled] | |
[Disabled] | Disables the Energy Related Products (ErP) Ready function. |
[Enabled] | Allows BIOS to switch off some power at S5 state to get system ready for |
| the ErP requirement. When set to [Enabled], power for WOL, WO_USB, |
| audio and onboard LEDs will be switched off at S5 state. |
Restore AC Power Loss [Power Off]
When set to [Power Off], the system goes into off state after an AC power loss. When set to [Power On], the system will reboot after an AC power loss. When set to [Last State], the system goes into either off or on state, whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PS/2 Device [Disabled]
[Disabled] | Disables the PS/2 devices from generating a wake event. |
[Enabled] | Enables the PS/2 devices to generate a wake event. |
Power On By PME Device [Disabled]
[Disabled] | Disables the PME devices from generating a wake event. |
[Enabled] | Enables the PME devices to generate a wake event. |
Chapter 3: BIOS setup |