6.2NVIDIA® SLI™ technology

The motherboard supports the NVIDIA® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section.

6.2.1Requirements

•In SLI mode, you should have two identical SLI-ready graphics cards that are NVIDIA® certified.

•Ensure that your graphics card driver supports the NVIDIA SLI technology. Download the latest driver from the NVIDIA website at www.nvidia.com.

•Ensure that your power supply unit (PSU) can provide at least the minimum power required by your system.

• We recommend that you install additional chassis fans for better thermal environment.

•Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics card and supported 3D application list.

6.2.2Installing two SLI-ready graphics cards

The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same.

1.Prepare two SLI-ready graphics cards.

2.Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 1 in

this user manual for the locations of the

PCIEX16 slots recommended for multi- graphics card installation.

3. Ensure that the cards are properly seated on the slots.

Chapter 6

ASUS MAXIMUS V EXTREME

6-7