| Item: 1/14 | Current | Setting | Unit |
OSD TWEAKIT | BCLK | 100.0 | 100.0 | (MHZ) |
OSD MONITOR | RATIO | 44.0 | 44.0 | (X) |
VGA HOTWIRE | CPU | 1.26250 | 1.26250 | (V) |
SETTING | IGPU | N/A | 0.24500 | (V) |
| DRAM | 1.65625 | 1.65625 | (V) |
| VCCSA | 0.95000 | 0.95000 | (V) |
|
|
|
|
|
| Apply (F10) | Refresh (F5) |
|
|
3.Use the <Up>, <Down>, <Left> and <Right> to move the highlighted item, use the <Enter> key to enter an item, use the <ESC> key to exit an item, and use the <F10> key to save settings.
4.Shortly press the ROG Connect button on the rear panel to switch the keyboard control between the OC Key device and the computer system.
• You may also plug an
(ROG_CON_SW) connector to replace the function of the ROG Connect button.
•The
5.Press and hold the ROG Connect button on the rear panel for three seconds to exit the OC Key function.
• When the OC Key function is disabled, shortly press the ROG Connect button on the |
| |
rear panel to switch the USB port 4 (white) function between ROG Connect mode |
| |
and regular USB mode. |
| |
• When the OC Key function is enabled, the USB port 4 (white) will stay in ROG |
| |
Connect mode only. |
| |
• In the need of updating OC Key device |
| |
firmware, plug one end of the ROG |
| |
Connect Cable to the USB port on the OC |
| |
Key device and the other end of the cable |
| |
to any USB port on the rear panel of the |
| |
motherboard. Launch the firmware upgrade |
| |
program downloaded from ASUS official |
| |
website and follow screen intructions to |
| |
update the OC Key device firmware. |
| |
• The OC Key function supports PS/2 | 2 | |
keyboards and USB keyboards without | ||
Chapter | ||
|
ASUS MAXIMUS V EXTREME |