DIGI+ Power Control

CPU Load-Line Calibration [Auto]

Load-line is defined by Intel® VRM specification and affects CPU power voltage. The CPU working voltage will decrease proportionally to CPU loading. Higher load-line calibration could get higher voltage and good overclocking performance but increases the CPU and VRM thermal conditions.

Select from Level 1 to Level 8 to adjust CPU power voltage from 0% to 100%.

• The actual performance boost may vary depending on your CPU specification.

•DO NOT remove the thermal module. The thermal conditions must be monitored.

CPU Voltage Frequency [Auto]

Switching frequency affects the VRM transient response and the thermal component conditions. Higher frequency gets quicker transient response.

Configuration options: [Auto] [Manual]

DO NOT remove the thermal module when setting this item to [Manual]. The thermal conditions should be monitored.

The following items appear only when you set the CPU Voltage Frequency to [Auto].

VRM Spread Spectrum [Disabled]

Enable the VRM Spread Spectrum to enhance system stability.

Configuration options: [Disabled] [Enabled]

Active Frequency Mode [Disabled]

Enable the Active Frequency Mode for an enhanced power saving condition.

Configuration options: [Disabled] [Enabled]

The following item appears only when you set the CPU Voltage Frequency to [Manual].

CPU Fixed Frequency [XXXX]

This item allows you to set a fixed CPU frequency The configuration options ranges from 300kHz to 1000kHz. Use the <+> or <-> keys to adjust the interval.

Chapter 3

ASUS MAXIMUS VI EXTREME

3-15