CPU Internal Power Configuration
CPU Integrated VR Efficiency Management [Auto]
Allows you to improve power saving when the processor is in low power state. Disable this item to make the Fully Integrated Voltage Regulator work in high performance at all times.
Configuration options: [Auto] [High Performance] [Balanced]
Power Decay Mode [Auto]
Allows you to enable this item to improve the power saving on the Fully Integrated Voltage Regulator as the processor goes into low current state.
Configuration options: [Auto] [Disabled] [Enabled]
Idle
Allows you to set the slew rate for the Fully Integrated Voltage Regulator as it enters manual override mode.
Configuration options: [Auto] [Regular] [Fast]
Idle
Allows you to set the slew rate for the Fully Integrated Voltage Regulator as it exits manual override mode.
Configuration options: [Auto] [Regular] [Fast]
Power Current Slope [Auto]
Allows you to adjust the gradient of the
Configuration options: [Auto] [LEVEL
Power Current Offset [Auto]
Allows you to increase or decrease the output current sensed by the CPU. It finds the balance between optimal regulating while staying below the current threshold.
Configuration options: [Auto] [100%] [87.5%] [75.0%] [62.5%] [50.0%] [37.5%] [25.0%] [12.5%] [0%]
Power Fast Ramp Response [Auto]
Allows you to increase to enhance the response of the voltage regulator during the load transient.
Configuration options: [Auto] [0.00] - [1.50]
CPU Internal Power Saving Control
Power Saving Level
Allows you to set the power saving threshold for overclocking. A low value provides enough power for overclocking. A high value provides a better power saving condition. The value ranges from:
Level 1 | 0 - 80A |
Level 2 | 0 - 50A |
Level 3 | 0 - 30A |
Chapter 3
ASUS MAXIMUS VI EXTREME |