3 Chapter
PCIE Tuning
CPU PCIE Controller [Enabled]
CPU PCIE Controller. Configuration options: [Disabled] [Enabled]
PCIE Clock Amplitude [Auto]
Adjust the magnitude of the PCIE Clocks. Higher may be better.
Configuration options: [Auto] [+5] -
Internal Graphics [Auto]
Keep IGD enabled based on setup options.
Configuration options: [Auto] [Disabled] [Enabled]
CPU Power Management
The subitems in this menu allow you to set the CPU ratio and features.
Enhanced Intel SpeedStep Technology [Enabled]
Allows the operating system to dynamically adjust the processor voltage and cores frequency to decrease the average power consumption and decrease average heat production.
Configuration options: [Enabled] [Disabled]
Turbo Mode [Enabled]
Allows you to enable your processor cores to run faster than the base operating frequency when it is below power, current and specification limit.
Configuration options: [Disabled] [Enabled]
The following items appear only when you set the Turbo Mode to [Enabled].
Turbo Mode Parameters
Long Duration Package Power Limit [Auto]
Allows you to limit the Turbo Ratio’s time duration thay exceeds the TDP (Thermal Design Power) for maximum performance. Use the <+> and
Package Power Time Window [Auto]
Also known as Power Limit 1, and allows you to maintain the time window for Turbo Ratio over TDP (Thermal Design Power). Use the <+> and
Short Duration Package Power Limit [Auto]
Also known as Power Limit 2, and allows you to provide rapid protection when the package power exceeds the Power Limit 1. Use the <+> and
CPU Integrated VR Current Limit [Auto]*
Allows you to set a higher current limit to prevent frequency and power throttling when overclocking. Use the <+> and
Chapter 3: BIOS setup |