3 Chapter

3.6.3SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Empty if no SATA device is installed to the corresponding SATA port.

Scroll down to display the other BIOS items.

SATA Mode Selection [AHCI]

Allows you to set the SATA configuration.

[Disabled]

Disables the SATA function.

[IDE]

Set to [IDE] when you want to use the Serial ATA hard disk drives as

 

Parallel ATA physical storage devices.

[AHCI]

Set to [AHCI] when you want the SATA hard disk drives to use the AHCI

 

(Advanced Host Controller Interface). The AHCI allows the onboard storage

 

driver to enable advanced Serial ATA features that increases storage

 

performance on random workloads by allowing the drive to internally

 

optimize the order of commands.

[RAID]

Set to [RAID] when you want to create a RAID configuration from the SATA

 

hard disk drives.

Aggressive LPM Support [Auto]

Allows you to enable the PCH to aggressively enter link power state.

Configuration options: [Auto] [Disabled] [Enabled]

3-30

Chapter 3: BIOS setup