SETUP H/W .3

Settings Motherboard

3.HARDWARE SETUP

1)Keyboard Wake Up (3-pin KB WAKEUP)

This allows you to disable or enable the keyboard power up function. Set this jumper to Enable if you wish to use your keyboard (by pressing any key or the spacebar depending on your motherboard) to power up your computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not power ON if you set this to Enable and do not have the appropriate ATX power supply.

KB WAKEUP

1

2

3

1

2

3

Disable Enable (Default)

ME-99

ME-99 Keyboard Wake Up

Motherboard Feature Settings (DIP Switches – DSW1 & DSW2)

The motherboard’s onboard functions are adjusted through the DIP switches. The white block represents the switch’s position. The example below shows all the switches in the OFF position.

 

 

 

 

 

 

 

 

 

 

 

DSW1

 

 

 

 

 

 

 

 

 

 

 

 

8

7

6

5

4

3

2

1

OFF

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Frequency Multiple

 

 

 

 

 

 

 

ON

ON

2. Frequency Multiple

 

 

 

 

 

 

 

 

 

 

3. Frequency Multiple

 

1. Frequency Selection

 

4. Frequency Multiple

 

2. Frequency Selection

 

5. Onboard VGA Setting

3. Frequency Selection

 

6. VGA Frame Buffer Setting

4. Frequency Selection

 

7. LCD Setting

 

 

 

5. Memory Data Transfer

8. Onboard Audio Setting

6. VIO Setting

 

 

 

8

7

6

5

4

3

2

1

 

7. VIO Setting

 

 

 

OFF

8. Core Voltage (Vcore) Setting

ME-99

 

 

 

 

 

 

 

 

 

 

 

 

 

ON

ON

 

 

 

 

 

 

 

 

 

ME-99 DIP Switches

 

DSW2

 

 

 

 

 

 

 

 

 

 

 

 

18

ASUS ME-99 User’s Manual