3.HARDWARE SETUP

11)Wake-On-LAN Connector (3-pin WOL_CON)

This connector connects to a LAN card with a Wake-On-LAN output, such as the ASUS PCI-L101 Ethernet card (see 7.1 ASUS PCI-L101 Fast Ethernet Card). The connector powers up the system when a wakeup packet or signal is received through the LAN card.

IMPORTANT: This feature requires that Wake On LAN is set to Enabled (see

4.5.1Power Up Control) and that your system has an ATX power supply with at least 720mA +5V standby power.

IMPORTANT: Requires an ATX power supply with at least 720mA +5 volt standby power

WOL_CON

+5 Volt Standby

Ground PME

ME-99

ME-99 Wake-On-LAN Connector

12)Wake-On-Ring Connector (2-pin WOR)

This connector connects to internal modem cards with a Wake-On-Ring output. The connector powers up the system when a ringup packet or signal is received through the internal modem card. NOTE: For external modems, Wake-On-Ring is detected through the COM port.

IMPORTANT: This feature requires that PWR Up On Modem Act is set toEnabled (see 4.5.1 Power Up Control).

H/W SETUP

Connectors

3.

 

 

 

WOR

1 2

Ground PIXRI#

ME-99

ME-99 Wake-On-Ring Connector

ASUS ME-99 User’s Manual

33