2.1Connecting the cables

1.Remove the rear cover.

2.Connect the cables as the following instructions:

•To connect the audio cable: connect one end of the audio cable to the monitor’s Audio-in port, and then connect the other end to the computer multi-media (or audio) card’s audio output.

•To connect the power cord: connect one end of the power cord securely to the monitor’s AC input port, the other end to a power outlet.

•To connect the VGA cable:

a.Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port.

b.Connect the other end of the VGA/DVI cable to your computer’s VGA/DVI port.

c.Tighten the two screws to secure the VGA/DVI connector.

3.Gather all the cables, then hold them with the cable holder.

4.Close the rear connector. Align the cover to the four slots near the ports and the two slots at the bottom of the monitor, then close the cover carefully. A click indicates that the cover has been closed successfully.

Cabl e holder

2.2Turning the monitor on

Gently touch the power sensor. See page 1-3 for the location of the power sensor. The power indicatorlights up in blue to show that the monitor is ON.

ASUS LCD Monitor MW221/MW201 Series

2 - 1