Asus NCL-DS, NCL-D, NCL-DR1 12 . BMC connector (16-pinBMCCONN1), 11 . ATX power connectors (24-pinATXPWR1, 8-pinATX12V1)

11 . ATX power connectors (24-pin ATXPWR1, 8-pin ATX12V1)

These connectors are for SSI power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit.

• Use of an SSI 12 V Specification 2.0-compliant power supply unit (PSU) that provides a minimum power of 450 W is recommended for a fully-configured system.

•Do not forget to connect the 8-pin ATX +12 V power plug; otherwise, the system will not boot up.

•Use of a PSU with a higher power output is recommended when configuring a system with more power consuming devices. The system may become unstable or may not boot up if the power is inadequate.

•You must install a PSU with a higher power rating if you intend to install additional devices.

ATXPWR1	ATX12V1
24-pin Power Connector	8-pin

+3 Volts	+3 Volts	Ground	+5 Volts	Ground	+5 Volts	Ground	Power OK	+5V Standby	+12 Volts	+12 Volts	+3 Volts
+3 Volts	-12 Volts	Ground	PSON#	Ground	Ground	Ground	-5 Volts	+5 Volts	+5 Volts	+5 Volts	Ground

GND	GND	GND	GND
12V	12V	12V	12V

NCL-DS Series ATX Power connectors

For Power Supply

with 24-pin

Power Connector

12 . BMC connector (16-pin BMCCONN1)

This connector is for the ASUS server management card, if available.

NCL-DS Series BMC connector

+5VSB +5VSB BMC SMBCLK 12CCLK1 PSON# BMC_RST# PWROK PSONEN#

BMCCONN1

+5VSB +5VSB BMC SMBDATA 12CDATA1 FP_PWRBTN# BMC_PRESENT# BMC_SMI# GND

ASUS NCL-DS Series 2 - 33