Use the arrow down key to scroll down the menu.
Power On Ring | [Disabled] |
Power On LAN | [Disabled] |
Power On By PME# | [Disabled] |
Power On By RTC Alarm | [Disabled] |
Power On By PS/2 Keyboard | [Disabled] |
Power On By PS/2 Mouse | [Disabled] |
Allows you to enable or disable the motherboard Advance Power Management (APM) feature. Configuration options: [Enabled] [Disabled]
Video Power Down Mode [Suspend]Allows you to select the video power down mode
Configuration options: [Disabled] [Standby] [Suspend]
Hard Disk Power Down Mode [Suspend]Allows you to select the hard disk power down mode
Configuration options: [Disabled] [Standby] [Suspend]
Suspend Time Out [Disabled]Allows you to select the specified time at which the system goes on suspend mode. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min] [8 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min]
Throttle Slow Clock Ratio [50%]Allows you to select duty cycle in throttle mode.
Configuration options: [87.5%] [75.0%] [62.5%] [50.0%] [37.5%] [25.0%] [12.5%]
System Thermal [Disabled]Allows you to enable or disable the use of system thermal condition generate a power management event. Configuration options: [Disabled] [Enabled]
Power Button Mode [On/Off]Allows the system to go into On/Off mode or suspend mode when the power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off]When set to Power Off, the system goes into off state after an AC power loss. When set to Power On, the system goes on after an AC power loss. When set to Last State, the system goes into either off or on state, whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
4 - 28 | Chapter 4: BIOS setup |