2 . CPU fan pin selection (3-pin FM_CPU1, FM_CPU2)

These jumpers allow you to connect either a 3-pin or a 4-pin fan cable plug to the CPU fan connectors (CPU_FAN1, CPU_FAN2). Set these jumpers to pins 1-2 if you are using a 3-pin fan cable plug, or to pins 2-3 if you are using a 4-pin plug.

NCLV-D

FM_CPU1

1

2

2

3

DC mode

PWM

(Default)

 

 

FM_CPU2

2

1

3

2

DC mode

PWM

(Default)

 

 

NCLV-D FM_CPU Setting

3 . USB device wake-up (3-pin USBPW12, USBPW34)

Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode).

NCLV-D

USBPW12

1

2

2

3

 

 

 

 

 

+5V +5VSB (Default)

USBPW34

1

2

2

3

 

 

 

 

 

+5V +5VSB (Default)

NCLV-D USB device wake-up

• The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up.

•The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode.

2 - 20

Chapter 2: Hardware information