7 . USB connectors (10-1 pin USB56, USB78)

These connectors are for USB 2.0 ports. Connect the USB module cable to any of these connectors, then install the module to a slot opening at the back of the system chassis. These USB connectors comply with USB 2.0 specification that supports up to 480 Mbps connection speed.

NCLV-D

NCLV-D USB 2.0 connector

NC

GND

USB_P6+

USB_P6-

USB+5V

USB34

USB+5V

USB_P5+

USB_P5-

USB+5V

Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!

8 . Serial port connector (10-1 pin COM2)

This connector is for a serial (COM) port. Connect the serial port module cable to this connector, then install the module to a slot opening at the back of the system chassis.

NCLV-D

COM2

PIN 1

NCLV-D

Serial port2 (COM2) connector

2 - 30

Chapter 2: Hardware information