III. HARDWARE SETUP

Jumpers1.Keyboard Power Up (KBWK)

This allows you to disable or enable the keyboard power up function. Set to Enable if you want to use your keyboard (by pressing <Spacebar>) to power up your computer. This feature requires an ATX power supply that can supply at least 300mA on the +5VSB lead. The default is set to Disable because not all computers have the appropriate ATX power supply. Your computer will not func- tion if you set this to Enable and if you do not have the right ATX power supply.

KBWK

1

1

2

2

3

3

Disable

Enable

(Default)

 

P2B-F Keyboard Power Up

2.AGP Frequency Selection (AGPFS)

This option sets the frequency ratio between the AGP bus frequency and the CPU bus frequency. The default sets the AGP bus frequency to be 2/3 of the CPU bus frequency. See the processor table on the next page.

 

AGPFS

1

1

2

2

3

3

2:3 1:1 AGP:CPU Ratio (Default)

P2B-F AGP Settings

WARNING! AGP bus frequencies above 66MHz exceed the specifications for the AGP interface and are not guaranteed to be stable.

Motherboard Settings

III. H/W SETUP

ASUS P2B-F User’s Manual

15