Asus P2E-VM [2-3], VGAEN, [2-3], INT_EN, Enable, Enable, Jumpers, WARNING, Setting, Disable, Setting, Disable, 4.Install Expansion Cards, 6.Setup the BIOS Software

INSTALLATION .III

Jumpers

III. INSTALLATION

Installation Steps

Before using your computer, you must complete the following steps:1.Set Jumpers on the Motherboard2.Install System Memory Modules3.Install the Central Processing Unit (CPU)4.Install Expansion Cards5.Connect Ribbon Cables, Cabinet Wires, and Power Supply6.Setup the BIOS Software

WARNING! Computer motherboards, baseboards and components, such as SCSI cards, contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer.

1.Unplug your computer when working on the inside.

2.Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case.

3.Hold components by the edges and try not to touch the IC chips, leads or connectors, or other components.

4.Place components on a grounded antistatic pad or on the bag that came with the component whenever the components are separated from the system.

1.Jumpers

1.VGA Interrupt Selection (INT_EN) and 2. VGA Setting (VGAEN)

The INT_EN jumper allows you to set the VGA interrupt method. The default disables the chipset’s internal interrupt routing. Some TV-Tuner or MPEG cards may require that the interrupt be assigned by the onboard chipset, in which case enable INT_EN. The VGAEN jumper allows you to enable or disable the onboard VGA. Disable the onboard VGA if you are using a VGA card on the expansion slot.

	INT_EN	INT_EN	Setting	INT_EN
	1	1	Enable	[2-3]
2		2
3		3	Disable	[1-2] (def)
	Disable	Enable

(Default)

VGAEN	VGAEN	Setting	VGAEN
		Enable	[1-2] (def)
1	1
2	2	Disable	[2-3]
3	3
Enable	Disable
(Default)

P2L-VM/P2E-VM VGA Settings

14 ASUS P2L-VM/P2E-VM User’s Manual