INSTALLATION .III

Connectors

III.INSTALLATION

11.Floppy Disk Drive Connector (34-1pin FLOPPY)

This connector supports the provided floppy drive ribbon cable. After connect- ing the single end to the board, connect the two plugs on the other end to the floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta- tion when using ribbon cables with pin 5 plugged).

NOTE: Orient the red markings on the floppy ribbon cable to PIN 1

PIN 1

Floppy Disk Drive Connector

P2L-VM/P2E-VM Floppy Disk Drive Connector

12.Stereo Audio In Connectors (4-pin CD1, CD2, AUX)

CD1, CD2, and AUX connectors can be used to receive stereo audio input from an internal CD-ROM drive or other sound sources such as a TV tuner or MPEG card.

 

 

 

 

 

 

 

Right Audio Channel

 

 

L

 

 

 

 

Ground

 

 

 

 

 

 

Ground

 

 

G

 

 

 

 

 

 

G

 

 

 

 

Left Audio Channel

 

 

R

 

CD1

 

 

 

 

 

 

 

 

AUX

 

CD2

 

 

 

 

 

 

Left Audio Channel

 

 

 

 

 

 

 

 

 

 

 

 

Ground

 

 

 

 

 

 

 

 

 

 

 

 

Ground

 

 

 

 

 

 

 

 

 

 

 

 

Right Audio Channel

 

 

 

 

 

 

NOTE: AUX has the same pin definitions as CD1

P2L-VM/P2E-VM Stereo Audio In Connectors

13.Digital Audio Interface (6-pin)

This connector is the digital link between the motherboard and your audio de- vices such as CD player, sampler, or DAT recorder. It allows the digital trans- mission of audio data in SPDIF (Sony/Philips Digital Interface) Format.

SPDIF

device output if this, Short TTL:

IN Signal Digital SPDIFI: OUT Signal Digital SPDIFO:

level TTL is

 

P2L-VM/P2E-VM Digital Audio Interface

30

ASUS P2L-VM/P2E-VM User’s Manual